MTS Multipurpose Elite Test - Manual (Page 68)

Setpoint and Span Window
4. Observe the Signal Scope. The trace for displacement feedback changes from 4 mm to 6 mm immediately.
Signal Scope Displacement Results
5. Make any additional changes to the test and run as desired.
6. Click Stop to stop the test.
7. Click the Stop Procedure (lock) icon to stop the Procedure activity.
8. Exit the MPE application.
9. Turn off power to the HSM and HPU, then exit the Station Manager application.
68 Multipurpose Elite Test Design Guide
5.0 Creating Tests