MTS Multipurpose Elite Test User Manual
Page 65
Advertising
Signal Scope Example
8. In the Setpoint and Span window, observe that Span is set to 100% and Setpoint is set to 0 mm.
Setpoint and Span Window Pre-Test Observation
9. To start the test, click the Run button (green arrow) on the Program Control panel.
10. Observe the test as it plays out on the Signal Scope. The trace for displacement feedback:
•
Ramps from zero to setpoint (4.0 mm) in one second.
•
Tapers to a span setting of 50% in 2 seconds.
11. Observe that the Station Manager application span changes to 50% and setpoint changes to 4.0 mm.
Multipurpose Elite Test Design Guide 65
5.0 Creating Tests
Advertising