MTS Multipurpose Elite Test - Manual (Page 27)

Note:When control is provided by a handset, the application controls will be locked and overlaid by
the handset exclusive control icon:
Description of Model 494.05 Handset
Description Item
Programmable display 1
Hydraulics indicator 2
Exclusive control 3
Interlock indicators 4
Thumbwheel (manually positions the actuator when Manual Command is enabled) 5
Manual command 6
Interlock reset/override 7
Program Run/Stop/Hold controls 8
Hydraulics off 9
3.2.7.0 Generating a Report in MP
To generate reports from within MP, you must have an existing report template and the Microsoft Excel
application or a suitable Microsoft Excel reader. To design or modify a report template, you must have the
Reporter Add-In application, which is a separately licensed product.
1. On the Explorer panel, right-click the Test Run name and select Generate Report. To generate multiple
reports at one time, click Test Runs on the Explorer panel to see the Test Runs table. Select the test
runs to include in the reports. To select more than one, press the Ctrl key and click the report name.
Right-click and select Generate Report. The Generate Report window opens.
2. Select one or more templates to use for your reports and click Generate Report.
3. Microsoft Excel opens with the newly generated report. If multiple test runs were selected, a separate
report for each Test Run will open. Modify as desired and save and close. By default, the report is shown
below the test run name in the Explorer panel. You can click Preferences > Configuration and select
a different location for generated reports on the Project tab.
Multipurpose Elite Test Design Guide 27
3.0 Designing a Test