MTS Multipurpose Elite Test - Manual (Page 26)

Test execution with the MPX application
Similar to the MPE application, the MPX application can be used to run tests. However, the MPX application
cannot create or modify tests. In order to create or modify tests, you must use the MPE application.
Considerations for automatic background saves
It is important to keep in mind that when you start a test run, the application automatically saves the current
state of the test. If you need to modify a test without necessarily saving your changes; that is, experiment
with the test, you should perform a Save As of your test, modify as required, and then run the new test.
If you inadvertently run a modified test and have to undo the changes you made to the test before you ran it
(and the application automatically saved it), you must do so manually.
3.2.6.0 Model 494.05 Handset Station Activities
If your station is equipped with a Model 494.05 Handset, you can use it to:
• Manually position the actuator to install the specimen.
• Apply offsets.
Note:
You cannot use the handset to set limit levels and actions for detectors. Perform these activities with
the MTS Station Manager application.
Model 494.05 Handset
26 Multipurpose Elite Test Design Guide
3.0 Designing a Test