MTS Multipurpose Elite Test - Manual (Page 98)

Note:
After the specimen is installed, you will have to reset the detector limits to levels that are compatible
with your test.
7.2.2.0 Access and Set Detector Settings
The Station Manager application provides multiple locations where you can monitor and set detector limits
and actions.
Station setup access
The Station Setup window includes Limit Detectors and Error Detectors panels with tabs where you can
define detector limits and actions.
Limit Detectors Panel
Each channel input includes a Limits tab where you can define detector limits and actions.
Station Controls access
You can use the Detectors window to monitor and define detector limits and actions. Click the Detectors
button on the Station Manager application window’s Station Controls panel toolbar to view the Detectors
window.
7.2.3.0 Resetting a Detector
To reset a detector that has tripped:
1. Determine the event that caused the detector to trip and fix the problem.
2. Click Reset on the Station Controls panel in the Station Manager application, or click Reset on the Station
panel of the Multipurpose Elite application.
98 Multipurpose Elite Test Design Guide
7.0 MTS Controller Software