MTS Multipurpose Elite Test - Manual (Page 44)

Value Property
No Compensator Compensator
Ch 1 Channel List
Displacement Control Mode
2 mm Relative End Level 1
-2 mm Relative End Level 2
N/A Phase Lag
5.2.6.0 Adding a Second Ramp Activity
Use this task to add a second Ramp activity to the procedure. During the test, the second Ramp activity
ramps command to zero.
1. On the Procedure workspace, right-click the existing Ramp activity and select Copy. Then, right-click
below the Cycle activity and select Paste.
Copying and Pasting Existing Ramp Activity
2. Define Ramp activity properties:
a. Ensure that the Ramp activity is selected.
b. Enter the following as necessary:
44 Multipurpose Elite Test Design Guide
5.0 Creating Tests