RKI Instruments SDM-2009 PC Controlled Configuration - Manual (Page 100)

95 • Instrument Function Menu
Sensor Tab. For further explanation of each tab, see the next section.
To exit the Instrument Information Window and return to the main program window,
click Cancel.
Edit Function
This function can be activated by either right clicking an instrument and selecting
Edit(E) when the pull down menu appears or by selecting an instrument and then
using the alt/E key combination.
NOTE: The Edit function is not active and cannot be selected if the Change
Parameter selection box in the Instrument Information section of the
Parameter Tab in the Configuration Window is not selected.
Figure 73: Instrument Information Window, Parameter Tab