RKI Instruments SDM-2009 PC Controlled Configuration - Manual (Page 26)

21 • Installing the SDM-GX Docking Station PC Controller Software
17. Turn on a docking station by pressing and holding the POWER button for at
least 1 second.
18. The first time an SDM-2009 is turned on after being connected to the
computer, a Found New Hardware window will appear.
NOTE: The following instructions do not apply to computers running Windows
Vista or Windows 7. The hardware driver will automatically install and
you will be notified that the USB device is ready for use.
Figure 16: Found New Hardware Wizard
19. Select the “Install the software automatically” option and click Next.