RKI Instruments SDM-2009 PC Controlled Configuration User Manual
Page 39
Setting Up the PC Controller Program • 34
Selecting a Cylinder from the Predefined List
The Cylinders Window comes with several predefined cylinders that you can choose
from.
1.
To access the Cylinders Window, click the Cylinders button along the top of the
main program window.
2.
Click in a Name field, click on the drop down menu that appears, and select a
predefined cylinder.
Figure 24: Predefined List of Cylinders
3.
Set the expiration date by clicking in the Expiration field and clicking the drop
down menu that appears. Use the calendar to choose an expiration date. The
expiration date box will be highlighted in orange if the expiration date of the
cylinder is less than 10 days away. The expiration date box will be highlighted
in red if the expiration date has passed.
4.
Select or deselect the Active box for each cylinder. If the cylinder is active, the
PC Controller program will alert you at start up if the cylinder has passed its
expiration date. If it is not active, the program will not alert you.
5.
To return to the main program window without saving any changes, click