RKI Instruments SDM-2009 PC Controlled Configuration User Manual
Page 30
25 • Overview of the SDM-GX Docking Station PC Controller Program
Main Program Window
The main program window is where the current status of the program operation is
shown. Any SDM-2009s and instruments that are currently connected to it and any
instruments that have previously been but are not currently connected to it are also
shown. The program’s various functions are initiated or accessed from this screen.
The current date and time are always displayed in the lower right corner of the main
program window.
Figure 20: Parts of the Main Program Window
Control Buttons
The Cylinders, Config, Logs, and Exit control buttons are located along the top
right of the window. The Bump test and Calibration control buttons are located in
the lower right of the window along with the Force Calibration selection box. The use
of these control buttons and the Force Calibration selection box is described in other
parts of this manual.
SDM-2009/Instrument Display Area
The large middle portion of the main program window displays SDM-2009s and
instruments that are currently connected to the PC Controller Program and
Message Area
SDM-2009/Instrument
Display Area