RKI Instruments SDM-2009 PC Controlled Configuration User Manual
Page 90
85 • Logs Window
To change the proportions of the table to the graph, click the divider between
the two and move it.
To display instrument information along with the data and graph, click the “i”
control button in the upper left corner.
6.
In the table part of the screen,
•
To view only events in the interval trend data file, click the Only Event
selection box.
7.
In the graph part of the screen,
•
You can choose which gas(es) you want to graph by selecting or
deselecting the boxes next to each gas name.
•
Click the Event box to show event data on the graph. Small indications will
appear at the top of the graph to show when an event occurred.
•
To zoom in on a particular part of the graph, drag a box around that area so
that it is highlighted in gray. The graph will zoom in. To return to a previous
zoom, click the Previous control button in the upper right corner of the
graph section. To return to the original zoom, click the Restore control
button in the upper right corner of the graph section.
•
Clicking anywhere on the graph will cause a vertical red line to appear and
the corresponding data point will be highlighted in the table. Clicking a data
point in the table will move the red line in the graph to that data point.
8.
To print the data, select either List or Graph in the upper right corner of the
window and then click the Print control button in the upper right corner of the
window. The Print control button has a printer icon on it. A dialog box will
appear confirming if you want to print. Click OK. If Graph is selected, the data
will print as a graph. If List is selected, the data will print as a table.