RKI Instruments SDM-2009 PC Controlled Configuration User Manual
Page 40
35 • Setting Up the PC Controller Program
Cancel in the Cylinders Window. A window will appear notifying you that
changes will not be saved. To continue to the main program window, click OK.
To return to the Cylinders Window to save your changes, click Cancel.
6.
If you want to save any changes made, click OK. A window will appear asking
if you want to save the changes you made. To return to the main program
window and save your changes, click Yes. To return to the main program
window without saving changes, click No. To return to the Cylinders Window,
click Cancel.
Defining New Cylinders
If your instrument configuration requires the use of a cylinder that is not in the
predefined list, you can add that cylinder by either typing in the information for the
cylinder or by editing the information for an existing cylinder.
1.
To access the Cylinders Window, click the Cylinders button along the top of the
main program window.
2.
Click in any blank cylinder name field and click again to bring the cursor up or
use the drop down menu to select a cylinder name that is close to the one you
want and click the name to bring the cursor up.
Figure 25: New Cylinder