RKI Instruments SDM-2009 PC Controlled Configuration User Manual
Page 80
75 • Logs Window
7.
In the graph part of the screen,
•
You can choose which gas(es) you want to graph by selecting or
deselecting the boxes next to each gas name.
•
To zoom in on a particular part of the graph, drag a box around that area so
that it is highlighted in gray. The graph will zoom in. To return to a previous
zoom, click the Previous control button in the upper right corner of the
graph section. To return to the original zoom, click the Restore control
button in the upper right corner of the graph section.
•
A vertical red line appears on the graph at the point that created the alarm
trend file. Clicking anywhere on the graph will move that red line and
highlight that data point in the table. Clicking a data point in the table will
move the red line in the graph to that data point.
8.
To print the data, select either List or Graph in the upper right corner of the
window and then click the Print control button in the upper right corner of the
window. The Print control button has a printer icon on it. A dialog box will
appear confirming if you want to print. Click OK. If Graph is selected, the data
will print as a graph. If List is selected, the data will print as a table.
9.
To save the data to a file which can be imported into another program, select
either List or Graph in the upper right corner of the window and then click the
Save to File control button. The Save to File control button has a floppy disk
icon on it. A dialog box will appear for you to specify the file name, file location,
and file type.
Figure 55: Save As Dialog Box