Rockwell Automation PF700 PowerFlex 700 Drive Components Replacement - Frame 9 - Manual (Page 55)

Rockwell Automation Publication 20B-IN025B-EN-P - January 2011 55
Component Replacement Procedures Chapter 3
5. Perform Remove all IGBT Snubber components: on page 29 .
6. Perform component removal for Gate Interface Board on page 58 .
7. Perform Remove Transitional Busbar on page 28 if Bus Capacitors or the
positive (DC+) Flexible Capacitor Busbars supplied with the kit must be
installed.
8. Remove the eight screws that secure the IGBT to the chassis. Remove the
IGBT by tipping the right edge out first; return or dispose of it properly.
AC Output Busbar Torx
Screws (6)
Output Busbar
Torx Head Bolt
AC Output Busbar
Standoff Nuts (2)
Output Busbar Standoff Nut
and Setscrew
Output Busbar
Hex Head Bolts(2)