Rockwell Automation PF700 PowerFlex 700 Drive Components Replacement - Frame 9 - Manual (Page 74)

74 Rockwell Automation Publication 20B-IN025B-EN-P - January 2011
Chapter 3 Component Replacement Procedures
13. Remove the 12 exterior screws on the fan mounting plate.
14. Carefully remove the mounting plate and fan through the front of the
drive chassis; you may need to pry the mounting plate away from the
gasket.
The fan housing remains mounted on the chassis.
Install Components
1. Remove the new fan housing from the new fan and mounting plate.
Discard the new fan housing.
2. Install new fan and screw mounting plate to chassis.
3. Reassemble remaining components in reverse order of removal
instructions.
4. Replace all safety shields and enclosure covers before applying power to the
drive.
Fan Mounting
Plate Screws (12)
Busbar Mounting
Plate Bracket