Rockwell Automation PF700 PowerFlex 700 Drive Components Replacement - Frame 9 - Manual (Page 72)

72 Rockwell Automation Publication 20B-IN025B-EN-P - January 2011
Chapter 3 Component Replacement Procedures
Do not disconnect the U, V, or W Busbars at the bottom.
8. Remove the four 10 mm nuts for the busbars mounting plate.
U, V, and W
Busbars
17 mm
Bolts (2) 11 mm Nut
and Setscrew
Current
Transducer
Output
Busbar
Busbar Mounting Plate
10 mm nuts (4)
AC Input Drive Shown