Rockwell Automation PF700 PowerFlex 700 Drive Components Replacement - Frame 9 - Manual (Page 59)

Rockwell Automation Publication 20B-IN025B-EN-P - January 2011 59
Component Replacement Procedures Chapter 3
5. Remove the four 7 mm board-mounting nuts.
6. Remove the board; return or dispose of it properly.
Install Components
1. Install the new board.
2. Torque mounting nuts to 1.6 N•m (14 lb•in).
3. Reconnect wiring as detailed in the Table on previous page.
4. Replace all safety shields and enclosure covers before applying power to the
drive.
Gate Interface Board
Mounting Nuts (4)
J1
J2
J3
J5
J4
J6
J8
J7