Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 24)

3-4 Configuring the WIM
22-COMM-E adapter). Also choose “Remote” when you intend to
operate the WIM in RTU Master mode. See
Appendix D for
details. If you select “Remote,” disregard Steps 5 through 9 and
instead, go directly to Step 10 on
Page 3-6 and perform sub-steps
A through H.
Figure 3.4 Local Connection Screen
5. Enter a name and tap Next ->. The “Connection Summary” screen
( Figure 3.5 ) appears.
Figure 3.5 Connection Summary Screen
6. You can save the connection information and connect immediately,
or save the connection for connecting later.
After making a selection, the “Location for saved connection” screen
(
Figure 3.6 ) appears, enabling you to navigate to a desired location
on the Pocket PC to store connections.