Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 67)

Wireless Flash Updating DSI Peripherals C-9
Figure C.17 Confirm Flash Update Warning Screen
7. Click FLASH to start the flash update ( Figure C.18 ).
Figure C.18 Executing Flash Update Progress Screen
Note: Near the end of the flash update process, the WIM status
indicator changes from solid blue to flashing red, and then to
flashing green.
8. When the flash update is completed, the message window in the
Executing Flash Update screen changes to indicate that flash update
was completed (
Figure C.19 ).