Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 34)

3-14 Configuring the WIM
7. In the DriveExplorer or DriveExplorer Lite window, select Explore
> Connect > Serial Point-to-Point to display the DriveExplorer
menu tree window. In the left pane, click the + signs to expand the
tree. For this example, click on “22-WIM-Nx DF1 Wireless Module”
to display the WIM parameters in the right pane (
Figure 3.25 ).
Double-click a parameter to edit it.
Figure 3.25 DriveExplorer/DriveExplorer Lite Menu Tree Window
Assigning a Name for the WIM (optional)
The WIM can be assigned a custom name (up to 16 alpha-numeric
characters) that represents its associated drive’s application function,
such as Pump 1 or Conveyor A. After successfully establishing a custom
WIM name, it replaces the default drive name (for example, PowerFlex
40 3P 460V 1.0HP) that appears in the “Entire Bluetooth Neighborhood”
screen and will now be recognized on the network.
1. With the DriveExplorer/DriveExplorer Lite Menu Tree window
( Figure 3.25 ) displayed and the “22-WIM-Nx DF1 Wireless
Module” selected, select Explore > Device Properties… to display
the WIM’s properties screen (
Figure 3.26 ).
Figure 3.26 WIM Properties Screen