Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 74)

C-16 Wireless Flash Updating DSI Peripherals
10. Power cycle the drive to initialize the device with the WIM.
11. Use the Bluetooth Manager to re-establish the wireless connection to
the device.
12. On the Select Device to Update screen, verify that the Revision
number shown now matches the firmware version flashed into the
device.
13. Click Cancel to close the Select Device to Update screen. Then click
Cancel again to close the device’s general information screen. The
DriveExecutive online window is now ready for use.