Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 82)

D-8 Using RTU Master Mode
Using one of the Allen-Bradley drive software tools enables you to
monitor, configure, and control any of the drives on the RTU Master
network. You can also monitor and configure the WIM.
Using Pocket DriveExplorer for Pocket PC
1. Re-establish wireless communication between the WIM and the
computer. Launch Pocket DriveExplorer for Pocket PC. The
ConnectionMgr screen (
Figure D.10 ) appears. Select Connect >
New to display the New Connection Wizard screen ( Figure D.11 ).
2. Select the “Bluetooth” radio button and click Next -> to display the
“Where is your destination?” screen ( Figure D.12 ).
Figure D.12 “Where is your destination?” Screen
Accessing the Drives on RTU Master Network
Figure D.10 ConnectionMgr
Screen
Figure D.11 New Connection Wizard
Screen