Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 25)

Configuring the WIM 3-5
Figure 3.6 “Location for saved connection” Screen
7. Tap OK to save the connection file and begin the connection process.
The “Searching for Bluetooth Connections” screen
(
Figure 3.7 ) appears, asking you to select a detected Bluetooth
device.
Figure 3.7 Searching for Bluetooth Connections Screen
8. Select the Bluetooth device from this screen and tap OK. This screen
only appears the first time you connect to this Bluetooth device. Its
address is saved to the connection file. The next time you open the
connection, if this same device is within range, Pocket DriveExplorer
for Pocket PC will immediately connect.
The connection process then begins ( Figure 3.8 ).