Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 85)

Using RTU Master Mode D-11
Using DriveExplorer (Full Version Only)
1. Re-establish wireless communication between the WIM and the
computer. Launch DriveExplorer. The application window
(
Figure D.19 ) will appear.
Figure D.19 DriveExplorer Full Application Window
2. Select Explore > Connect > Serial to Network… to display the
Network Connection - Node Selection screen ( Figure D.20 ).
Figure D.20 Network Connection - Node Selection Screen
3. Select the “Multiple” radio button. Then enter the node address for
the first network drive (for this example, “1”), and the node address
for the last network drive (for this example, “3”) to view all drives
simultaneously in the DriveExplorer online window. Click Connect
to display the DriveExplorer network menu tree (
Figure D.21 ).
TIP: If the network drive node address is valid, “Online” is shown next
to the selected address. If a node address is not valid, “Offline” will
appear.