Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 41)

Configuring the WIM 3-21
Figure 3.36 Configure Drivers Window
10. Select Communications > RSWho to display the browse window.
Then expand the menu tree in the left pane to display either the
“Unrecognized Device” icon (which represents the drive) or the
“DSI” icon to verify that the driver is communicating with the
device. The screen should look similar to
Figure 3.37 .
Figure 3.37 RSLinx Browse Window
11. Launch DriveExecutive to access parameters in the WIM, connected
drive, and any connected peripherals.
12. In the DriveExecutive window, select Drive > Connect to Drive…
to display the Connect to Drive menu tree window. Then expand the
menu tree in the left pane to display either the “Unrecognized
Device” icon (which represents the drive) or the “DSI” icon. The
screen should look similar to
Figure 3.38 .