Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 63)

Wireless Flash Updating DSI Peripherals C-5
8. Tap Flash to start the flash update ( Figure C.9 ). When the flash
update is complete, Pocket DriveExplorer for Pocket PC will reset
the DSI peripheral (
Figure C.10 ).
Note: The WIM status indicator changes from solid blue to flashing
red, and then to flashing green after the reset process is complete.
9. Tap Close to exit the flash update process ( Figure C.11 ).
Figure C.11 DeviceFlash Completed Screen
The WIM status indicator changes from flashing green to solid blue,
and the StatusMonitor screen will reappear. Verify that the Product
Revision number matches the firmware version that was flashed to
the peripheral device.
Figure C.9 Flash Update Progress
Screen
Figure C.10 Device Reset Screen