Rockwell Automation 22-WIM-N1 DSI Wireless Interface Module - Manual (Page 43)

Configuring the WIM 3-23
Assigning a Name for the WIM (optional)
The WIM can be assigned a custom name (up to 16 alpha-numeric
characters) that represents its associated drive’s application function,
such as Pump 1 or Conveyor A. After successfully establishing a custom
WIM name, it replaces the default drive name (for example, PowerFlex
40 3P 460V 1.0HP) that appears in the “Entire Bluetooth Neighborhood”
screen and will now be recognized on the network.
1. With the DriveExecutive Menu Tree window ( Figure 3.39 ) displayed
and the “22-WIM-Nx DF1” selected, select Peripheral >
Properties… to display the WIM’s Properties screen (
Figure 3.40 ).
Figure 3.40 WIM Properties Screen
2. In the text box, enter the desired name (for example, Pump 1) and
click OK.
3. For the entered name to be recognized on the network, either reset
the WIM or power cycle the drive. Then re-establish wireless
communication between the WIM and the desktop or laptop
computer.