Rockwell Automation MV SMC Flex OEM Components - Manual (Page 17)

Chapter
4
1503E-IN001E-EN-P – June 2013
Power Stack Installation
Identification
A power stack (single phase, 3300/4160V) power stack is shown below
in Figure 4.1.
Figure 4.1 – Single-phase Power Stack
Verify the voltage and current rating of the OEM power stacks by
examining the label and referencing it to the information in Table 4.A.
Table 4.A – Power Stack Options and Catalog Numbers
Voltage  Current (Amps) Catalog Number Part Number
1000 V, 3 phase, 50/60 Hz
180 1503E-PPZ1T 80258-011-51
360 1503E-PPZ1A 80258-011-52
2300 V, 3 phase, 50/60 Hz
180 1503E-PPAT 80258-011-53
360 1503E-PPAA 80258-011-54
600 1503E-PPAC 80258-011-55
3300 V, 3 phase, 50/60 Hz
180 1503E-PPCT 80258-011-56
360 1503E-PPCA 80258-011-57
600 1503E-PPCC 80258-011-58
4160 V, 3 phase, 50/60 Hz
180 1503E-PPET 80258-011-59
360 1503E-PPEA 80258-011-60
600 1503E-PPEC 80258-011-61
6900 V, 3 phase, 50/60 Hz
180 1503E-PPKT 80258-011-62
360 1503E-PPKA 80258-011-63
360 1503E-PPKC 80258-011-64
 Voltage ranges: 1000 = 800 to 1449V
2300 = 1450 to 2499V
3300/4160 = 2500 to 4799V
6900 = 4800 to 7200V