Rockwell Automation MV SMC Flex OEM Components - Manual (Page 19)

Power Stack Installation 4-3
1503E-IN001E-EN-P – June 2013
Table 4.C – Power Stack Specifications
Description 180 A, 360 A, 600 A
Input Voltages 
(50/60 Hz)
1000 volts AC, 3 phase, +10%, -15% 
2300 volts AC, 3 phase, +10%, -15%
3300 volts AC, 3 phase, +10%, -15%
4160 volts AC, 3 phase, +10%, -15%
6900 volts AC, 3 phase, +10%, -15%
Ambient
Temperature
0°C to 40°C (32°F to 104°F) 
Power Section
(for 3 phases) 6 SCR at 1000/2300 volts 12 SCR at 4160 volts
12 SCR at 3300 volts 18 SCR at 6900 volts
Repetitive Peak
Inverse Voltage Rating 1000 volts – 4500 PIV 3300/4160 volts – 13000 PIV
2400 volts – 6500 PIV 6900 volts – 19500 PIV
Thermal Capacity
600% of FLA, 10 seconds
450% of FLA, 30 seconds
dv/dt Protection R.C. Snubber Network
Maximum Heat
Dissipation (kW)
Start or Stop Cycle (@ 450% FLA) Continuous
180 A 360 A 600 A
0 to 2499 V 7 13 22 .25
2401 to 4799 V 14 26 44 .25
4800 to 7200 V 21 39 66 .25
Altitude
0 to 1000 m (0 to 3,300 ft.)
(See Controller Deratings Table A-1 in Appendix A)
Net Shipping Weight
(3 phases)
Rating 1000 / 2300 V 3300 / 4160 V 6900 V
180A / 360A 105 kg (231 lb) 113 kg (249 lb) 126 kg (278 lb)
600 A 132 kg (290 lb) 154 kg (339 lb) 170 kg (374 lb)
 Refer to Table 4.A for acceptable input voltage ranges.
 180 A and 360 A ratings only for 1000 V power stack
 For other ambient ranges, refer to Factory.
Dimensions
Refer to Figures 4.2 through 4.7 for the dimensions of the power
stacks.
Specifications