Rockwell Automation MV SMC Flex OEM Components - Manual (Page 33)

Chapter
5
1503E-IN001E-EN-P – June 2013
Control Component Installation
Interface Board Installation
Mount the Interface Board in a suitable location within a low voltage
compartment, using the appropriate hardware. Use the interface board
mounting bracket (refer to Figure 5.1).
A T T E N T I O N A T T E N T I O N Do not mount the interface board in the same
compartment as high voltage components.
Ensure that barriers are provided in the final
application to prevent access to any live high-
voltage parts, including insulated conductors
located in enclosures with low voltage parts and
wiring. Failure to do so may result in severe
burns, injury or death.
Figure 5.1 – Mounting the Interface Board