Rockwell Automation MV SMC Flex OEM Components - Manual (Page 9)

Chapter
3
1503E-IN001E-EN-P – June 2013
Power Stack Frame Installation
Identification
A power stack frame is shown below in Figure 3.1 (3300/4160 V frame
shown).
Figure 3.1 – MV SMC Flex OEM Power Stack Frame
Verify the voltage and current rating of the OEM frame using the
information located on the nameplate at the front of the frame
(see Figure 3.2).
Refer to Table 3.A for the frame description and catalog numbers.
Figure 3.2 – MV SMC Flex OEM Frame Nameplate Data