Rockwell Automation MV SMC Flex OEM Components - Manual (Page 5)

Chapter
1
1503E-IN001E-EN-P – June 2013
Introduction
Scope
This document pertains to the Bulletin 1503E MV SMC Flex OEM
components.
Most of the components described herein are provided in various
1503E kits; however, some of the devices described are not provided.
These must be acquired separately.
The power stack frame is a complete three-phase power system used in
solid-state reduced voltage motor controllers (refer to Figure 3.1).
Power stacks are also available as a set of loose three-phase components
(refer to Figure 4.1). Each form of power stack assembly (frame, loose)
is applied with other Bulletin 1503E control components and power
devices, in forming a complete solution.
Additional Publications
Please refer to the following publications for additional information
about the Bulletin 1503E products:
1560E-SR022_-EN-P Medium Voltage Smart Motor
Controller (SMC) • Specification Guide
1560E-UM051_-EN-P Medium Voltage SMC Flex Motor
Controller, Bulletin 1503E, 1560E,
1562E • User Manual
This document contains the following
information for the MV SMC Flex:
• Commissioning
• Maintenance and Troubleshooting
• Parameter List
• Spare Parts List
Order additional copies of instruction manuals for all Allen-Bradley
medium voltage products from the Rockwell Automation on-line
ordering system at http://www.rockwellautomationdox.com.