Create the routing table, Create the routing table -3 – Rockwell Automation 1756-DH485 ControlLogix DH-485 Communication Module User Manual User Manual
Page 49
Advertising
Publication 1756-UM532A-EN-P - May 2006
Use RSLinx Software to Create a Routing Table 4-3
Create the Routing Table
To create a routing table for your application, follow these steps:
1. Start RSLinx.
2. Browse the network.
3. Right-click on the 1756-DH485 module.
4. Use the left-side navigation bar to see your DH-485 application, as
shown in the example below.
A.Expand the configuration
tree until the module
appears.
B. Right-click on the
1756-DH485 module.
C. Select Module
Configuration.
Advertising