Rockwell Automation 1756-DH485 ControlLogix DH-485 Communication Module User Manual - Manual (Page 80)

Publication 1756-UM532A-EN-P - May 2006
8-2 Communicate from an SLC 5/05 Controller to an SLC 5/03 Controller over an EtherNet/IP Network
Hardware Configuration In this hardware configuration, an SLC 5/05 controller communicates to an
SLC 5/03 controller over an EtherNet/IP network.
• The SLC 5/05 controller initiates a message. (1)
• The message is sent over an EtherNet/IP network to a 1756-ENBT
module. (2)
• The message is then sent over the backplane to a 1756-DH485 module.
(3)
• The 1756-DH485 module then sends the message through channel A
and link couplers to the SLC 5/03 controller. (4)
DH+/RIO
DH485
ETHERNET
ControlLogix Controller
1756-ENBT
(3)
1756-DH485
(3)
Channel A
(4)
SLC 5/03 Controller
(4)
1756-DH485 communicates
through link couplers.
(4)
44065
SLC 5/05 controller
initiates the message.
(1)
EtherNet/IP Network
(2)
AIC+
AIC