Configure the message, Configure the message -7 – Rockwell Automation 1756-DH485 ControlLogix DH-485 Communication Module User Manual User Manual
Page 67
Advertising
Publication 1756-UM532A-EN-P - May 2006
Communicate Between SLC Controllers over DH+ and DH485 Networks 6-7
Configure the Message
This is the Setup dialog for the example message.
The SLC 5/04 controller connects
to a 1756-DHRIO module at node
56 octal or 46 decimal.
The SLC 5/04 controller sends a
remote message to the SLC 5/03
controller that is on a DH485
network.
The SLC 5/03 controller is located
at node 1. The DH485 network is
assigned as link 1.
Advertising