Configure the plc-5 dh+ channel 1a link id, Create a message in rslogix 5, Configure the plc-5 dh+ channel 1a link id -4 – Rockwell Automation 1756-DH485 ControlLogix DH-485 Communication Module User Manual User Manual
Page 76: Create a message in rslogix 5 -4
Advertising
Publication 1756-UM532A-EN-P - May 2006
7-4 Communicate Between a PLC-5 Controller and a Remote SLC 5/03 Controller over Multiple DH-485 Networks
Configure the PLC-5 DH+ Channel 1A Link ID
The PLC-5 DH+ Channel 1A Link ID needs to be configured. This is an
example of the channel properties.
Create a Message in
RSLogix 5
This is an example of a remote message for the example configuration.
Advertising