Rockwell Automation 1756-DH485 ControlLogix DH-485 Communication Module User Manual - Manual (Page 60)

Publication 1756-UM532A-EN-P - May 2006
5-6 Communicate from an SLC 5/03 Controller to a Logix Controller over a DH-485 Network
Create a Logic Map for the
Local Message in RSLogix
5000 Software You must logically map the SLC data address to the ControlLogix tag. To get
to the Logix Map in RSLogix 5000 software go to: Logic > Map PLC/SLC
Messages.
This is the logic map needed for the example message.