Rockwell Automation 1771-TCM,D17716.5.108 TEMPERATURE CONTROL MOD - Manual (Page 67)

Chapter 7
Monitoring Status Data
7-17
Word Description Bits
23 13 LoopĆ8 CV Ramp Rate Ċ (selected in bit 4 of word 3 of the configuration block)
• 0 = Loop-8 CV is not ramping.
• 1 = LoopĆ8 CV is ramping at the rate entered in word 4 of the configuration block.
14 LoopĆ8 Input High TC Range Alarm Ċ (based on thermocouple type set in bits 12-15 of word 2 of the configuration block)
• 0 = LoopĆ8 PV input is below the high TCĆrange alarm value.
• 1 = LoopĆ8 PV input is at or above the high TCĆrange alarm value.
15 LoopĆ8 Input Low TCĆRange Alarm Ċ (based on thermocouple type set in bits 12-15 of word 2 of the configuration block)
• 0 = LoopĆ8 PV input is above the low TCĆrange alarm value.
• 1 = LoopĆ8 PV input is at or below the low TCĆrange alarm value.
24 0-15 LoopĆ8 ConfigurationĆBlockĆError or GainsĆBlockĆError Word Ċ Indicates the first configurationĆblock or gainsĆblock word
containing an outĆofĆrange value or incompatible bit selection. (See appendix B for details on locating errors.)
• 0 = No error detected in configuration block or gains block for loop 8.
• 1 thru 23 in the leastĆsignificant pair of digits = configurationĆblock error Ċ (lowerĆdigits value = word containing error).
• 1 thru 57 in the upper pair of digits = gainsĆblock error Ċ (upperĆdigits value = word containing an outĆofĆrange value).
25 0-15 LoopĆ8 DynamicĆBlockĆError Word or AutoĆTuning Error Code Ċ Indicates the first dynamicĆblock word containing an
outĆofĆrange value or an autoĆtuning error. (See appendix B for details on locating errors.)
• 0 = No error detected in dynamic block or in autoĆtuning for loop 8.
• 1 thru 34 in leastĆsignificant pair of digits = dynamicĆblock error Ċ (lowerĆdigits value = word containing outĆofĆrange value).
• 65 thru 67 in the upper pair of digits = a code that indicates an autoĆtuning error.
26 0 LoopĆ1 Heat TPO Bit
1 LoopĆ2 Heat TPO Bit
2 LoopĆ3 Heat TPO Bit
3 LoopĆ4 Heat TPO Bit
4 LoopĆ5 Heat TPO Bit
5 LoopĆ6 Heat TPO Bit
6 LoopĆ7 Heat TPO Bit
7 LoopĆ8 Heat TPO Bit
8 LoopĆ1 Cool TPO Bit
9 LoopĆ2 Cool TPO Bit
10 LoopĆ3 Cool TPO Bit
11 LoopĆ4 Cool TPO Bit
12 LoopĆ5 Cool TPO Bit
13 LoopĆ6 Cool TPO Bit
14 LoopĆ7 Cool TPO Bit
15 LoopĆ8 Cool TPO Bit