Rockwell Automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Device User Manual - Manual (Page 21)

Rockwell Automation Publication 1788-UM059A-EN-P - August 2014 21
Configure the Linking Device Chapter 3
4. In the left pane of the dialog box, click the + next to the IP address for the
1788-EN2DNR linking device.
5. In the left pane, click the + next to the DeviceNet network.
You see the 1788-EN2DNR linking device in the left pane.
6. Click the 1788-EN2DNR linking device in the left pane.
The linking device appears in the right pane.
7. Click OK.
8. If a warning text box asking you if you wish to continue appears, click Yes.
9. Enter the desired node address or data rate, then click Apply.