Rockwell Automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Device User Manual - Manual (Page 3)

Rockwell Automation Publication 1788-UM059A-EN-P - August 2014 3
Table of Contents
Preface Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 1
Linking Device Overview About the Linking Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Linking Device Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
EtherNet/IP Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DeviceNet Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DeviceNet Standard and Safety I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Add I/O Online (Online Scanlist Changes Allowed in Run Mode). . . . . 8
Chapter 2
Install the Linking Device System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Required Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Required Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connect the Linking Device to the EtherNet/IP Network. . . . . . . . . . . 10
Connect the Linking Device to the DeviceNet Network. . . . . . . . . . . . . 10
Set the DeviceNet Node Address and Data Rate . . . . . . . . . . . . . . . . . . . . 11
Set the DeviceNet Node Address and Data Rate by Using the
Rotary Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Set the DeviceNet Node Address and Data Rate
by Using RSNetWorx for DeviceNet Software. . . . . . . . . . . . . . . . . . 12
Set the Linking Device IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Set the Linking Device IP Address by Using the Rotary Switches . 12
Set the Linking Device IP Address by Using DHCP/BOOTP . . . 13
Set the Linking Device IP Address by Using RSLinx Software . . . . 15
Set the Linking Device IP Address by Using the Linking Device
Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Configure the Driver in RSLinx Software . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Register the EDS File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 3
Configure the Linking Device RSNetWorx for DeviceNet Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Set the DeviceNet Node Address and Data Rate . . . . . . . . . . . . . . . . 20
Enable/Disable Autobaud. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Configure DeviceNet I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Studio 5000 Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Add the Linking Device to a Logix Designer Application . . . . . . . . 28
Configure the Linking Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Assembly Objects and Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31