Rockwell Automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Device User Manual - Manual (Page 39)

Rockwell Automation Publication 1788-UM059A-EN-P - August 2014 39
SD Card Chapter 5
Load from the SD Card
To load the configuration currently on the SD card to the linking device, the
inserted SD card can be either locked or unlocked.
The image below shows a locked SD card.
Clicking Load to Module produces this warning:
Clicking Yes loads the configuration stored on the SD card to the linking device.
Any configuration currently stored in the linking device is overwritten.