Rockwell Automation 1788-EN2DNR EtherNet/IP to DeviceNet Linking Device User Manual - Manual (Page 29)

Rockwell Automation Publication 1788-UM059A-EN-P - August 2014 29
Configure the Linking Device Chapter 3
7. From the Select Module Type dialog box, select 1788-EN2DNR 1788
Ethernet to DeviceNet Linking Device and click Create.
The AOP needs to be installed for the linking device to show up in the list.
The AOP is available here: https://download.rockwellautomation.com/
esd/download.aspx?downloadid=addonprofiles
The New Module dialog box appears.
8. In the Name box, enter a module name.
9. Click IP Address and type the IP address for which the linking device is
configured.
10. Click the Connection tab.
11. Enter the Requested Packet Interval (RPI or update rate) in a range from
2…750 ms.
12. Click the RSNetWorx tab.