Rockwell Automation 1771-DB BASIC MODULE - Manual (Page 63)

Chapter
Installing and Replacing Components 3
3 -11
After installing the memory module or battery, reassemble the BASIC
module as follows:
1. Insert the board into the main case.
20370–M
2. Replace the right-side cover.
20369–M
Important: Make sure you replace
the washers. Also, do not
over-tighten the screws; otherwise
you can damage the cover.
Programming
the BASIC
Module
4
G
Programming Instructions
G
Creating a Program
G
Numbering Program Lines
G
Entering a Program
G
Running/Stopping Program
Reassemble the BASIC
Module
What’s Next?