Enter a program – Rockwell Automation 1771-DB BASIC MODULE User Manual
Page 71
Advertising
![background image](/manuals/579953/71/background.png)
Chapter
Programming the BASIC Module
4
4 -7
To enter a BASIC program using an ASCII terminal follow these steps.
Important: Refer to the BASIC Development Software Programming
Manual (publication number 1746-6.2) for information on entering a
program using PBASE software.
1.
Select the program port using jumper JW4 (page 1 -6).
2.
Connect the ASCII terminal to the BASIC module program port (see
page 2 -2).
3.
Verify that the console device is configured to communicate with the
BASIC module.
4.
Apply power to your system.
If a program is not in RAM, this screen appears:
BASIC Module - Catalog Number 1771-DB/B
Firmware Revision: A
Allen-Bradley Company, Copyright 1989, 1990, 1991, 1992, 1993, 1994
All rights reserved
>
Enter a Program
Advertising