Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Installation - ForGe Control - Manual (Page 22)

22 Rockwell Automation Publication 7000-IN007E-EN-P - June 2014
Chapter 3 Drive Installation
Control/Cabling Cabinet
The following diagrams illustrate the medium voltage area, located in the
control/cabling cabinet behind the low voltage compartment and with barriers
removed.
Note: Heat pipes are only available within AFE rectifier “B” Frame models.
Figure 16 - Cabling cabinet for AFE rectifier (heat sink model)
Hall Effect Sensors
Sensing Boards
Line Terminals
Current Transformers
Grounding Network
(For use with Isolation Transformer)
or
Ground Filter
(For use with Line reactor)
Motor Filter Capacitors
Surge Arresters
Motor Terminals