Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Installation - ForGe Control - Manual (Page 47)

Rockwell Automation Publication 7000-IN007E-EN-P - June 2014 47
Drive Installation Chapter 3
Figure 40 - Fan hood assembly
Figure 41 - Acoustic can hood assembly
Locate the exhaust hood on top of the cabinet as show in Figure 43 , and re-install
the original cover plate previously set aside. Align the notches on the bottom
flange toward the sides of the drive. Affix the assembly to the drive top plate, and
tighten all hardware.
Exhaust hood panels
(Quantity = 2)
Flat plate
(Quantity = 1)
M6 thread forming screws
(Quantity = 20)
All the components are shipped assembled.