Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Installation - ForGe Control - Manual (Page 46)

46 Rockwell Automation Publication 7000-IN007E-EN-P - June 2014
Chapter 3 Drive Installation
Assembling Exhaust Fans
The cabinet-top fan assembly is similar to the model shown in Figure 39 :
Figure 39 - Fan assembly (heat pipe model shown)
Slide the edge of the fan housing’s bottom edge under the retention bracket, and
anchor the M6 hardware in the locations shown.
Assembling Fan Hoods
Assemble the two L-shaped panel components shipped with the drive as shown
in
Figure 41 .
Fan Assembly
Back of fan housing
slides under retaining
bracket.
M6 Taptite
(Qty. 4)