Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Installation - ForGe Control - Manual (Page 44)

44 Rockwell Automation Publication 7000-IN007E-EN-P - June 2014
Chapter 3 Drive Installation
Figure 36 - Aligning and joining heat pipe main and Line Reactor (for 6600V only)
NOTE: There is no required order of operations for installing fans and hoods
and joining cabinets. Joining cabinets first allows roof-top access to the upper
bolts, but these are also accessible from the front if you choose to install the fans
first.
Figure 37 - Connecting the cabinets with M10 hardware (split drives only)
Cabinets Bolted Together at
Four Corners using M10 Bolts
81003-929
M10
Hardware
M10
Hardware for
Back Bracket