Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Installation - ForGe Control - Manual (Page 3)

Rockwell Automation Publication 7000-IN007E-EN-P - June 2014 3
Summary of Changes
This manual contains new and updated information.
New and Updated
Information This table contains the changes made to this revision.
Topic Page
Replace “Tachometer” with “Encoder” Throughout
Added HPTC information to Topology section 11
Updated “When is an Encoder Required?” section and table 74
Replaced Encoder Selection table 75
Added HPTC information to Drive Torque Capabilities table 76
Updated Typical Application Load Torque Profiles 77
Updated Speed Regulator Bandwidth 92
Updated Torque Regulator Bandwidth 92
Inserted Torque Accuracy with HPTC 92
Added Polish to list of available Languages 93
Added “Dual-port Ethernet/IP” to Communications Protocols 94