Rockwell Automation 7000 PowerFlex Medium Voltage Air-Cooled (B Frame) Installation - ForGe Control - Manual (Page 7)

Rockwell Automation Publication 7000-IN007E-EN-P - June 2014 7
Chapter
1
Important User Information
This document provides procedural information for installing the PowerFlex
7000 medium voltage “B” Frame drives (heat sink and heat pipe models). This
document also includes specific information regarding customer responsibilities
prior to commissioning.
Who Should Use This Manual This manual is intended for use by personnel familiar with medium voltage and
solid-state variable speed drive equipment. The manual contains material that
enables qualified engineering personnel to install the drive system.
What Is Not in this Manual This manual provides information specific to installing and configuring the
PowerFlex 7000 “B” Frame drive. The following topics are covered in other
manuals in the next paragraph:
• Physically transporting or siting the drive cabinetry
• Commissioning-specific processes and configuration, as managed by a
Rockwell Automation commissioning engineer
• Details concerning the operator interface, or configuring drive parameters
• Dimensional and electrical drawings generated for each customer’s order
• Spare parts lists compiled for each customer’s order
• Troubleshooting potential usage problems
Refer to the following documents for additional product detail or instruction
relating to PowerFlex 7000 “B” Frame drives:
• Drive-specific Technical Specifications
• Transportation and Handling Procedures: receiving and handling
instructions for Medium Voltage variable frequency drive and related
equipment
• Installation Guide: detailed installation and pre-commissioning
procedures and information
• Commissioning Guide: required procedures and checklists for Rockwell
Automation field service engineers
• Drive-specific User Manual: instructions for daily and recurring drive
usage or maintenance tasks
• Drive-specific Technical Data: additional troubleshooting, parameters,
and specification information for MV variable frequency drives